|
Post by hamopride684 on Feb 2, 2011 21:10:02 GMT -5
[glow=green,2,300]hey kefes, I think I just made a good animation of the Rolling Escarget? or whatever? just take a look. And it was pivot that I used to make this.[/glow] and this aint mine. this is ManuSamoa61's he recently e-mailed me and asked if I can put this up. I think that's illegal here right? he's been sending me tons of animations and photos this week.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 2, 2011 22:07:49 GMT -5
Post them! Make it in one post though, as opposed to a bunch of little ones.
He's pretty good at it honestly...
|
|
Lennon
Levi Meeuwenberg
Posts: 793
|
Post by Lennon on Feb 3, 2011 0:30:56 GMT -5
The Rolling Escargot is pretty good, though it should probably be more around 3 or 4 spins.
|
|
|
Post by yamfriend on Feb 19, 2011 23:42:08 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2011 23:00:33 GMT -5
Is it really impossible to have an object in front of the guy? I'm talking to you too SRW...
|
|
|
Post by ManuSamoa61 on Feb 23, 2011 23:13:52 GMT -5
Is it really impossible to have an object in front of the guy? I'm talking to you too SRW... yeah I guess I should do that
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2011 23:35:49 GMT -5
Is it really impossible to have an object in front of the guy? I'm talking to you too SRW... yeah I guess I should do that Nevermind my post, actually. With the Salmon ladder, it's cool to see his legs dwindle, and than use that momentum to get to the next bar. If you blocked it off, we wouldn't see alot of the stick figure, so for that situation, I think it's okay. That was really a general response to SRW really lol.
|
|
|
Post by ManuSamoa61 on Feb 23, 2011 23:48:08 GMT -5
Hehehe my bad
|
|
|
Post by thatoneuser on Feb 26, 2011 23:06:37 GMT -5
|
|
|
Post by Philip on Sept 8, 2011 20:08:41 GMT -5
I just wanted to share with you guys my custom Sasuke course. So far I have made 12 editions. Not much else to say about it, LOL.
Below is the newest Edition, Ph- Sasuke 12.
|
|
|
Post by dyer on Oct 12, 2011 17:30:23 GMT -5
i was just bored so i just decided to make the flying ring. I drew the flying ring in the sense that if it was used it could be the last obstacle of the third stage. you have to click on it to see the whole thing.
|
|
supersheep
Hashimoto Kōji
Former Admin
Posts: 2,242
|
Post by supersheep on Oct 12, 2011 17:48:46 GMT -5
What exactly are those bars hanging from? or are they just floating in thin air?
|
|
|
Post by dyer on Oct 12, 2011 18:30:29 GMT -5
the bars are supposed to be kept in place by the metal supports, you know the thing that holds the track, like how it was for the pipe slider. this is a better version with the metal supports, i've also added a stopper so it wont fall off the bar.
|
|
|
Post by TCM on Oct 12, 2011 18:59:21 GMT -5
Unless the support system is rather complex, wouldn't the ring not move past a certain point because the supports are in the way?
|
|
supersheep
Hashimoto Kōji
Former Admin
Posts: 2,242
|
Post by supersheep on Oct 12, 2011 19:12:55 GMT -5
Unless the support system is rather complex, wouldn't the ring not move past a certain point because the supports are in the way? There is no possible support system to operate that obstacle. Trust me, i've tried.
|
|
|
Post by dyer on Oct 12, 2011 19:33:28 GMT -5
so how would it actually work then or is it simply impossible
|
|
supersheep
Hashimoto Kōji
Former Admin
Posts: 2,242
|
Post by supersheep on Oct 12, 2011 19:39:23 GMT -5
It wouldn't work...
|
|
|
Post by RiderLeangle on Oct 12, 2011 21:01:59 GMT -5
The only way it could possibly work is with really strong supports on one side of the notch, hold it up on one side with stoppers at the end of the track, have multiple sets of tracks (Like with one track having the opening forwards with a notch at the end, and another facing backwards) and then just have one later on and you have to jump from one ring to the other like the Swing Circle/Jumping Ring... And this is just assuming getting a ring to jump is realistic anyways...
|
|
|
Post by dyer on Oct 13, 2011 7:24:36 GMT -5
i made a new version since the 2 bar track wouldn't even work for a flying ring. I took a 1 track used for the jumping ring and the gliding ring, there is only 1 support for each track and they are at a slight angle, the tracks are shorter.
|
|
|
Post by Badalight on Oct 13, 2011 9:29:26 GMT -5
That design is even worse.
|
|